X4, BDX, LIVEWIRE TUNING INSTRUCTIONS

Custom Tuning Instructions

Make sure you have a charger on the truck with good batteries (clean all terminals etc.) or go buy a new battery if not. Make sure there are no aftermarket accessories on the truck or have their fuses pulled.

You will need to download the SCT/BULLYDOG update agent to your computer.

Plug the tuner into your computer and download the SCT/BULLYDOG Update Agent. Next you will update the tuner.

SELECT ONE OF THE LINKS BELOW TO UPDATE YOUR TUNER BEFORE LOADING THE CUSTOM TUNES.

SCT - https://derivesystems.helpjuice.com/sct-software/353181-device-updater

‍Bullydog - https://derivesystems.helpjuice.com/49686-bully-dog-general-questions/344100-where-do-i-find-the-device-updater
‍
Delete Custom Tunes are pre-loaded onto the tuner. Go to custom tuning, select one of the following off-road delete tunes

1. HEAVY TOW
2. LIGHT TOW
3. MPG/STREET
4. RACE
5. SOTF*

*(Switch on the fly) ONLY install SOTF if you have installed the SOTF switch beforehand. Tuner will download onto the truck, once it is 100% complete you are good to go.

You can then do the tranny relearn if needed - For Tranny Relearn click HERE

Instructions for SOTF Switches can be found HERE (or they will come with instructions if from BOD)

‍Ford 6.7 GDP SOTF Shift On The Fly Switch Install video found HERE

‍SCT Pyro Kit Installation For X4/BDX/LIVEWIRE Instructions click HERE
‍

*** IMPORTANT NOTE ***
If you need support on the tuner itself, you can contact Bullydog/SCT, however Do NOT mention that you are trying to load custom/delete tunes. If you mention anything about emissions equipment being removed on your truck they will not be able to help you.